Furuno RC-1500-1T Stereo System User Manual


 
2-13
By Cursor Pad
a) Press
to shift the cursor to the band entry location.
b) Use
or
to set band. Band is displayed in the following sequence.
2 4 6 8 12 16 18 22 25 001 002----- 029
ITU band
User channel
c) Press
.
d) Use
or
to set channel.
e) Press the [ENT] key. The Tx and Rx frequencies of the channel entered appear.
Setting Range
ITU Band: 2/4/6/8/12/16/18/24/25
User Band: 01-029
ITU Channel: XX001 - XX193
User Channel: XXX01 - XXX99
Tx/Rx frequency selection
Select the Tx or Rx field and press the [ENT] key. Enter desired frequency with the numeric keys.
Press the [ENT] key to finish.
Note
: If you enter the Tx frequency, the same frequency is entered to the Rx frequency.
Select Tx (or Rx)
and press [ENT].
POWER: HIGH
VOLUME
24
TUNE
Tx
:
12 329.0
KHZ
KHZ
POWER: HIGH
VOLUME
24
TUNE
Tx
Rx
:
12 329.0
KHZ
:
13 176.00
0. 00
KHZ
MODE: TELEPHONE
CH: 12034
MODE: TELEPHONE
CH: 12034
Rx
:
13 176.00
Power selection
Select the POWER field with the Cursor Pad and press the [ENT] key. Select power desired
among HIGH, MID and LOW with the Cursor Pad and press the [ENT] key.
Select POWER
and press [ENT].
POWER: HIGH
VOLUME 24
TUNE
: HIGH
POWER:
VOLUME 24
TUNE
: OK
:
Tx: 12329.0
KHZ
Rx: 13176.00
KHZ
Tx: 12329.0
KHZ
Rx: 13176.00
KHZ
MODE: TELEPHONE
CH: 12034
HIGH
MID
LOW
MODE: TELEPHONE
CH: 12034
Note:
Some FURUNO SSB radiotelephones do not provide the power selection HIGH, MID
or LOW.