Filter
Top Products
5-9
Enabling/Disabling DNID
DNID can be enabled or disabled as follows:
1. Press up/down arrow key to place the cursor on the desired DNID.
2. Press [Enter] to enable the DNID. (* mark appears.)
Press [Enter] to disable the DNID. (* mark disappears.)
Note: When a DNID is disabled “running data program (poll)”
is displayed and polling is cancelled.
3. Press [Esc] to close the window.
4. To return to the standby display, press [Esc] twice.
Note: “Disable”not permitted in FFA version.