Filter
Top Products
2 – 7
2. Unfasten screws A and push back B (for both right and left) shown below to remove the
printer cover.
Paper
Paper
Cover
Screw
C
A
B
3. Swing out the paper cover by 100° to 120° then lift it up from the right-hand side to remove
it from the printer.
4. Referring to the previous figure, lift the paper bail C. As shown in the figure which follows,
remove the roll paper stay D and then take out the roll paper.
D
Loading new roll paper
5. Insert the roll bar into the roll paper from the left side. Set the roll paper to the roll paper
cradle.
Roll Bar
Roll Paper
Roll Paper
Cradle
Type: A2 1PLT W
Code No.: 000-134-903
Type: T-214 white OKFIP
Code No.: 000-119-433
Select
either.
(no carbon)