Furuno RC-1500-1T Stereo System User Manual


 
1 – 1
Chapter 1 INTRODUCTION
1.1 System Diagram
The figure below shows the system diagram for the RC-1500-1T. Equipment are controlled
using FURUNO’s own radio interface system called MIF (see note below).
The type and number of the component differ from set to set.
Note: MIF is a handshaking type signal exchange system developed by FURUNO for remote
control of our radio equipment. In the RC-1500-1T, for example, the DSC-60 can automatically
set the frequency on the FURUNO SSB Radiotelephone.
SSB
Radiotelephone
Distribution
PCB
24VDC
24VDC
24VDC
24VDC
24VDC
NMEA OUT
(Maximum five Outputs)
(Inside Console)
(Inside Console)
DSC-60
NBDP
Printer
Interface
(IF-8500R)
PP-510
PP-510
(Printer)
(Printer)
NMEA IN
(Nav data)
24VDC (To each unit)
AC/DC
Changeover Unit
(Radio Switch Box)
24VDC
100VAC
(Main Source)
24VDC
(Reverse
Source)
IC-302
(Option)
Radio
Battery
Inmarsat C
(Distress Alert Unit)
RC-1500-1T
System 1 Standard type