Filter
Top Products
7. Click either the:
a. Pull radio button to configure
the DSP Configurator program
to match the device — proceed
to step9
-or-
b. Push radio button to configure
the device to match the
DSPConfigurator program —
proceed to step8
8. To push all of the DSP Configurator
gain and processor block
adjustments (configuration), and all
presets to the DMP128, proceed to
step9.
To tailor the push (push only the
configuration, only the presets,
or the configuration and selected
presets), click the Advanced button
and proceed to step 8a.
a. Select the Custom radio button.
b. Select the desired
checkbox(es); Push
Configuration
and/or Push Presets. If Push
Configuration is the only box
checked, click OK and proceed
to step9.
Figure 56. Selecting Live Mode (Continued)
9
9
8
8a
10
8c
8e
8f
8d
7a
7b
-or-
8b
8d
NOTE: Push Configuration includes all mix-point, gain and
processor block settings. It does not include partial presets.
c. If Push Presets was clicked in step 8b, click All to select all presets or
Selected to choose specific presets.
• If Selected was clicked, click OK and proceed to step 8d.
• If All was clicked (equivalent to a standard push), click OK and proceed to
step 9.
d. If Selected was clicked in step 8c, the Synchronize with Device dialog box (7b)
reappears. Click OK. The presets dialog box appears.
DMP128 • Software Control 92