Filter
Top Products
3. From the toolbar, select File > Open.
4. Locate the downloaded firmware file and click on it.
5. Click Begin on the main screen. The total progress bar tracks the
loading progress.
6. When the upload is finished, exit the program by selecting
File>Exit.
The firmware upload is complete.
Firmware Loader
The DSPConfigurator program includes a firmware
loader program which allows replacing the firmware
without taking the DMP128 out of service.
Download the desired firmware file from the Extron
website, (see “Firmware Upgrade Page” on
page144).
To access the firmware loader:
1. From the DSP Configurator toolbar, select Tools,
then Firmware Loader.
2. The Add Device dialog box appears. Type the IP
address of the DMP128, then press OK.
NOTE: If the IP has not been changed, the
default IP address is: 192.168.255.255
The Firmware Loader screen appears.
DMP128 • Reference Information 151