Filter
Top Products
a
bcdfge
m
l
hi
jk
Figure 16. DMP128 DSP Configurator Main Screen
The DSP Configurator program screen consists of an input and virtual return signal
processor chain, the mix-points, and an output signal processing chain. The main screen
consumes too much display area to show all mixers and processor chains at a single time
so there are max/min buttons to collapse each view and a scroll bar on the right side of
the menu to move up and down the screen.
The main mixer is separated into segments as shown in figure 16.
NOTE: The expansion bus returns mix-points are not shown in this view.
a Input gain control h Virtual returns signal processor channel
b Input signal processor channel i Virtual returns to output mix-points
c Input pre-mixer gain j Virtual returns to virtual sends mix-points
d Inputs to Outputs mix-points k Virtual returns to EXP sends mix-points
e Output trim control (post-mixer trim) l Virtual send bus to virtual returns mix-points
f Output signal processor channel m Inputs to expansion sends mix-points
g Output volume control
DMP128 • Software Control 20