Filter
Top Products
Figure 63. Building Blocks Dialog Box
The following steps select a lavalier microphone configuration for Input #1.
1. Left-click the Input 1 title box.
The Building Blocks Dialog Box (see figure 63 above) appears.
2. Select Lavalier by placing the mouse pointer over the word Lavalier.
The selected text changes color and is underlined. Left-click the selection.
3. The input channel then loads the pre-configured processor blocks, sets the gain, and
names the channel “Lavalier.”
The building blocks can be renamed and processor blocks further customized according
to the requirements of the system.
DMP128 • Software Control 107