Filter
Top Products
Mix-point Examples
In order to better understand how the mix-points work, the following diagrams provide
examples of mixes.
NOTE: To simplify the diagrams not all input and output lines are shown.
Figure 42. Input 1 to Output 1
In the first example (see figure 42) input audio from Mic/Line Input 1 is processed and
arrives at the output matrix mix-point. A double-click on the mix-point opens the dialog
box. When the mix-point is unmuted on Input 1 of the output mix-point, the mix junction
turns teal with a light green circle to indicate the open mix-point dialog box is the focus,
and the signal is routed to Output1.
The mix level can be adjusted using the slider or by direct input of a value between –35.0
and 25.0dB into the dialog box below the slider.
DMP128 • Software Control 75