Filter
Top Products
3. To move away from the highlighted block or set of sequential blocks, or to highlight
non-sequential blocks:
a. After highlighting blocks in step 2, press and hold the <Ctrl> key, then use
the arrow ( , , , and ) keys to navigate to the next desired element. As
long as the <Ctrl> key is held down, the block moved away from will not be
highlighted. If the block is highlighted, it will be unhightlighted.
b. Release the <Ctrl> key, but do not press any arrow keys.
4. To highlight another element or group of elements, repeat steps 2 and 3 as required.
5. To cut or copy, press the <Ctrl>+<X> or <Ctrl>+<C> key combination.
6. To save a preset, press <Alt>, then <T>, then right arrow , then down arrow ,
then <Enter> (see figure 60).
7. The Save a Preset dialog box appears.
a. <Tab> to the preset number field and type a specific preset number.
b. <Tab> to the preset name field and type a preset name.
NOTE: Unless entering a specific number and/or name, the
DSPConfigurator program enters the next sequential unused preset
number.
c. <Tab> to highlight the OK button and press the Enter
Enter
key.
Alt
T
Enter
Figure 60. Saving a Preset using Keyboard Navigation
DMP128 • Software Control 100