Filter
Top Products
Adding a Building Block
Custom building blocks can be created using a signal path configured for a specific
device.
For example, if a new mic is connected to Input #3, the signal path might be configured
for that specific mic.
In this example a gain setting is applied, the FBS filter is made active, and a noise gate
and delay are inserted and stored as a custom building block.
To create a building block for the new microphone:
1. Select the input number block.
2. In the dialog box, select the Add Block icon in the upper left.
The Add a Building Block dialog box opens.
3. In the dialog box, type a name for the new device.
4. Select the folder the new device goes in (see above).
5. Select Add.
DMP128 • Software Control 108