Filter
Top Products
Figure 25. Filter Dialog Box, Filters Added
Within the dialog box, a filter is focused when a filter type is inserted, or is focused by
clicking the filter number to the left of the filter selection drop-down list. Note how box3 in
figure 25 is highlighted in yellow, indicating it is the filter in focus. The results of the filter in
focus (independent of other filters) will show in the graph as a dotted line the same color
as its filter row when bypassed. When active (not bypassed), the line is solid.
When multiple filters are enabled, the graph indicates the focused filter result (independent
of other filters) in the color of the filter row in the type/parameters table. The composite
response, the combined effect of all filters not bypassed, is always displayed in red.
DMP128 • Software Control 34