Filter
Top Products
60
Legacy Analyzer Command List
Table of All Legacy Analyzer Commands
MOV Move NoNoNo
MPY Multiply No No No
MRD Memory Read No No N/A
MRDB Memory read byte No No N/A
MSDEV Specifies mass storage device N/A N/A No
MSI Mass storage interface N/A N/A N/A
MT0 Turns off marker signal track Yes Yes Yes Page 269
MT1 Turns on marker signal track Yes Yes Yes Page 270
MWR Memory Write NoNoN/A
MWRB Memory write byte No No N/A
MXM Maximum No No No
MXMH Max Hold Yes Yes Yes Page 271
MXRMODE Mixer mode N/A N/A No
NDB Number of dB N/A N/A N/A
NDBPNT Turns the N dB points function
on or off
N/A N/A N/A
NDBPNTR N dB points bandwidth N/A N/A N/A
NORMLIZE Normalize trace data N/A N/A Yes Page 272
NRL Normalized reference level N/A N/A Yes Page 273
NRPOS Normalized reference position N/A N/A Yes Page 274
NSTART Start harmonic No N/A N/A
NSTOP Stop harmonic No N/A N/A
O1 Output format Yes Yes N/A Page 275
O2 Output format Yes Yes N/A Page 276
O3 Output format Yes Yes N/A Page 277
O4 Output format Yes Yes N/A Page 278
OA Returns the active function
value
Yes Yes N/A Page 279
OBW Occupied bandwidth N/A N/A N/A
Table 2-1 Alphanumeric List of all Legacy Commands Showing their N9061A Support
Command Description 8566 8568 8560
Series
Page for
Further
Details