![](http://pdfasset.owneriq.net/3/da/3da3ae27-2a69-4594-ba9d-84576f7a4203/3da3ae27-2a69-4594-ba9d-84576f7a4203-bgca.png)
202
Programming Commands
KSl Transfer Trace B to Trace C
KSl
Transfer Trace B to Trace C
Syntax
Legacy Products
8566A/B, 8568A/B
Description
The KSl command transfers Trace B data to Trace C
NOTE Trace C cannot be an active trace. This means that the data in Trace C cannot be
updated as the analyzer sweeps. To ensure that the current settings of the analyzer
are reflected in the data transferred from Trace B to Trace C, you must follow the
four step process below.
• Select single sweep mode (S2 (page 307) or SNGLS command (page 313))
• Select the desired analyzer settings
• Take one complete sweep using the TS command (page 344)
• Transfer the data
NOTE The functions of the command KSl are identical to the BTC command (page 117).
KSl
;