Filter
Top Products
131
Programming Commands
CLRW Clear Write
For example if the 8560 series sends CLRW and the averaging is set to ON, the 8560 series analyzer
detector is automatically set to Sample. The N9061A application sets the X-series instrument trace type
to Trace Average, View/Blank to On and the Detector to Sample.
Table 4-4 Legacy Products command mapping to X-series for trace/detector settings
Legacy Products X-series
Trace
commands
Averaging
(VAVG)
Detector
(DET)
Trace/Detector
Trace Type
View/Blank Detector
CLRW Off Normal ClearWrite On Last set
CLRW On Sample Trace Average On Sample
MXMH Off Peak Max Hold On Peak
MXMH On Sample Trace Average On Peak
MINH Off NegPeak Min Hold On NegPeak
MINH On Sample Trace Average On NegPeak
VIEW Off Normal No change View No change
VIEW On Sample Trace Average View Sample
BLANK Off Normal No change Blank No change
BLANK On Sample Trace Average Blank Sample