Filter
Top Products
271
Programming Commands
MXMH Maximum Hold
MXMH
Maximum Hold
Syntax
Legacy Products
8560 series, 8566A/B, 8568A/B
Description
Updates each trace element with the maximum level detected.
MXMH updates the specified trace (either Trace A or Trace B) with a new value from a detector only if
the new value is larger than the previous trace data value.
NOTE The functions of the MXMH command are identical to the A2 command
(page 80)and B2 command (page 111).
NOTE TRA corresponds to Trace 1 and TRB corresponds to Trace 2.
For information on the trace settings of the X-series analyzers when legacy instrument trace settings are
sent, see Table 4-4, “Legacy Products command mapping to X-series for trace/detector settings.”
MXMH TRA
S
P
TRB
LF
CR
SP
,
;