117
Programming Commands
BTC Transfer Trace B to Trace C
BTC
Transfer Trace B to Trace C
Syntax
Legacy Products
8566A/B, 8568A/B
Description
The BTC command transfers Trace B data to Trace C
NOTE Trace C cannot be an active trace. This means that the data in Trace C cannot be
updated as the analyzer sweeps. To ensure that the current settings of the analyzer
are reflected in the data transferred from Trace B to Trace C, you must follow the
four step process below.
• Select single sweep mode (S2 or SNGLS command)
• Select the desired analyzer settings
• Take one complete sweep
• Transfer the data
NOTE The functions of the command BTC are identical to the KSl command (page 202).
BTC
;