Filter
Top Products
197
Programming Commands
KSi Exchange Trace B and Trace C
KSi
Exchange Trace B and Trace C
Syntax
Legacy Products
8566A/B, 8568A/B
Description
The KSi command exchanges Trace B data with Trace C data.
NOTE Trace C cannot be an active trace. This means that the data in Trace C cannot be
updated as the analyzer sweeps. To ensure that the current settings of the analyzer
are reflected in the data exchanged between Trace B and Trace C, you must follow
the four step process below.
• Select single sweep mode (S2 (page 307) or SNGLS command (page 313))
• Select the desired analyzer settings
• Take one complete sweep using the TS command (page 344)
• Exchange the data
NOTE The functions of the command KSi are identical to the BXC command (page 118)
and the XCH TRB,TRC command (page 354).
KSi
;