Filter
Top Products
37
Getting Started
Setting up N9061A on the X-Series Analyzer
Restore Mode Defaults
Resets the state for the currently active mode by resetting the mode persistent setting to their default
values and by performing a mode preset. This function will never cause a mode switch. This function
performs a full preset on the active mode.
Send Commands
After you finish setting up the N9061A application, you can send the commands of the legacy products
(8560 Series, 8566A/B, or 8568A/B) to X-Series analyzers. It is recomanded to use Agilent 82357B
USB/GPIB interface and free instrument to PC connection tool Agilent IO Libraries Suite when you
connct the instrument to a PC. For more details, visit:
http://www.agilent.com/find/82357B
http://www.agilent.com/find/iolib
NOTE The commands can ONLY be sent via a GPIB connection. It will not work for a
LAN connecttion.