Filter
Top Products
163
Programming Commands
FS Full Span
FS
Full Span
Syntax
Legacy Products
8560 series, 8566A/B, 8568A/B
Description
8560 series: The FS command sets the frequency span of the analyzer to full span. Resolution
bandwidth, video bandwidth, and sweep time are all set to auto-coupled.
8566A/B, 8568A/B: The FS command does an instrument preset, then sets the low band.
NOTE The functions of the FS command are identical to the LF command (page 216).
NOTE Whenever the frequency range of the analyzer you are using does not match the
remote language’s own range, the span is limited by the capabilities of the
replacement analyzer. The tables on the following pages list the frequency ranges
for all the supported remote languages when running on any of Agilent’s X-series
analyzers.
FS
LF
CR
SP
,
;