Filter
Top Products
42
Legacy Analyzer Command List
Table of All Legacy Analyzer Commands
Table of All Legacy Analyzer Commands
The following table lists all of the original programming commands from the legacy analyzers (that is,
the 8566A/B, the 8568A/B, and the 8560 Series), and indicates which are supported in N9061A. Refer to
the alphabetical listing of commands in Chapter 4 , “Programming Commands,” on page 75 for more
detailed information about each supported command.
Table 2-1 Alphanumeric List of all Legacy Commands Showing their N9061A Support
Command Description 8566 8568 8560
Series
Page for
Further
Details
A1 Clear-writes trace A Yes Yes Yes Page 79
A2 Max Holds trace A Yes Yes Yes Page 80
A3 View trace A Yes Yes Yes Page 81
A4 Blanks trace A Yes Yes Yes Page 82
ABORT Interrupt operation of all
user-defined functions
N/A N/A No
ABS Absolute No No No
ACP Performs the adjacent channel
power measurement
N/A N/A N/A
ACPACCL Accelerate adjacent channel
power measurement
N/A N/A No
ACPALPHA Adjacent channel power alpha
weighting
N/A N/A Yes Page 83
ACPALTCH Adjacent channel power
alternate channels
N/A N/A Yes Page 84
ACPBRPER Adjacent channel power burst
period
N/A N/A Yes Page 85
ACPBRWID Adjacent channel power burst
width
N/A N/A Yes Page 86
ACPBW Specifies channel bandwidth for
ACP measurement
N/A N/A Yes Page 87
ACPCOMPUTE Compute adjacent channel
power
N/A N/A Yes Page 88
ACPCONTM Performs ACP measurement in
continuous sweep
N/A N/A N/A
ACPE Adjacent channel power
extended
N/A N/A N/A