Filter
Top Products
28
Getting Started
Setting up N9061A on the X-Series Analyzer
Then, to select the legacy analyzer you wish to emulate, press the Mode Setup hardkey on the front
panel. Figure 1-2 shows the menu map that allows you to select the 8560 series analyzer or 8566A/B,
8568A/B and therefore the remote control commands to be used in the X-Series analyzer.
Figure 1-2 Mode Setup > Legacy Instrument Selection Menu Map
The HP8560 series and HP8566A/B, 8568A/B key allow you to select which legacy instrument to
emulate. The selected instrument determines the response to the “ID?” command and affects the
behavior of commands such as IP. You can use any command offered by any of the legacy instruments
regardless of the language setting. However, if the command is not correct for the selected legacy
instrument there is no guarantee that the command will work as expected. This does not affect the
response to the SCPI command “*IDN?”.
Mode Setup
Mode Setup
Logging
HP8560 series
HP8563E/EC
Restore Mode
Defaults
HP8566/68
HP8566B
Cmd Error
On Off
Logging
Preferences
HP8561E/EC
HP8562E/EC
HP8560E/EC
HP8560 Series
HP8563E/EC
HP8564E/EC
HP8565E/EC
Preferences
HP8566B
HP8568A
HP8566A
HP8566/68
HP8568B