Filter
Top Products
273
Programming Commands
NRL Normalized Reference Level
NRL
Normalized Reference Level
Syntax
The preset value is 0 dB.
Legacy Products
8560 series
Description
Sets the normalized reference level. It is intended to be used with the NORMLIZE command. When
using NRL, the input attenuator and IF step gains are not affected. This function is a trace-offset function
enabling the user to offset the displayed trace without introducing hardware switching errors into the
stimulus-response measurement. The unit of measure for NRL is dB.
NRL
S
P
DB
?
number
LF
LF
CR
SP
,