Filter
Top Products
59
Legacy Analyzer Command List
Table of All Legacy Analyzer Commands
MKN Normal marker Yes Yes Yes Page 251
MKNOISE Marker noise function Yes Yes Yes Page 252
MKOFF Turns all markers or the active
marker off
Yes Yes Yes Page 253
MKP Specifies the horizontal position
of the marker
Yes Yes N/A Page 254
MKPAUSE Pauses the sweep at the active
marker
No No N/A
MKPK Marker peak Yes Yes Yes Page 255
MKPT Marker peak threshold N/A N/A Yes Page 256
MKPX Marker peak excursion Yes Yes Yes Page 257
MKREAD Specifies marker readout mode Yes Yes N/A Page 258
MKRL Moves the active marker to
reference level
Yes Yes Yes Page 260
MKSP Marker span Yes Yes Yes Page 261
MKSS Marker step size Yes Yes Yes Page 262
MKSTOP Stops the sweep at the active
marker
No No N/A
MKT Position marker in units of time N/A N/A Yes Page 263
MKTBL Marker table N/A N/A N/A
MKTRACE Marker trace Yes Yes N/A Page 264
MKTRACK Turns the marker signal track on
or off
Yes Yes Yes Page 265
MKTYPE Specifies the type of active
marker to be used
Yes Yes N/A Page 266
ML Mixer Level Yes Yes Yes Page 267
MOD Modulo No No No
MODE Mode of operation N/A N/A N/A
MODRCLT Recalls trace from module
memory
N/A N/A No
MODSAVT Saves trace in module memory N/A N/A No
Table 2-1 Alphanumeric List of all Legacy Commands Showing their N9061A Support
Command Description 8566 8568 8560
Series
Page for
Further
Details