Filter
Top Products
53
Legacy Analyzer Command List
Table of All Legacy Analyzer Commands
KS39 Writes display memory address
in fast binary
No No N/A
KS43 Sets SRQ 102 when frequency
limit exceeded
No No N/A
KS91 Returns the amplitude error No No N/A
KS92 Specifies value DL, TH, active
mkr in display units
No No N/A
KS94 Returns code for harmonic
number in binary
No No N/A
KSA Sets amplitude units to dBm Yes Yes N/A Page 183
KSa Selects normal detection Yes Yes N/A Page 184
KSB Sets amplitude units to dBmV Yes Yes N/A Page 185
KSb Selects positive peak detection Yes Yes N/A Page 186
KSC Sets amplitude units to dBuV Yes Yes N/A Page 187
KSc Trace A + trace B -> trace A Yes Yes N/A Page 188
KSD Sets amplitude units to V Yes Yes N/A Page 189
KSd Selects negative peak detection Yes Yes N/A Page 190
KSE Sets the analyzer title mode Yes Yes N/A Page 191
KSe Selects sample detection Yes Yes N/A Page 192
KSF HP8566: Shifts the YTO
HP8568: Measures the Sweep
Time
No No N/A
KSf Recover last instrument state at
power on
No No N/A
KSG Turns on video averaging Yes Yes N/A Page 193
KSg Turns off the display Yes Yes N/A Page 194
KSH Turns off video averaging Yes Yes N/A Page 195
KSh Turns on the display Yes Yes N/A Page 196
KSI Allows the reference level to be
extended
No No N/A
KSi Exchanges traces B & C Yes Yes N/A Page 197
Table 2-1 Alphanumeric List of all Legacy Commands Showing their N9061A Support
Command Description 8566 8568 8560
Series
Page for
Further
Details