Filter
Top Products
302
Programming Commands
RL Reference Level
CAUTION Signal levels above +30 dBm will damage the analyzer. For a helpful suggestion
on this subject, see Chapter 3 , “Hints and Tips,” on page 71.
NOTE The 8566A/B and 8568A/B have the reference level from -89.9 dBm to +30 dBm.
The range of reference level for the MXA and PXA is -170 dBm to +30 dBm with
0 dB attanuation). The range of refernce level for EXA is -170 dBm to +23 dBm.
NOTE If the display line is on, changing the reference level does not adjust the position of
the display line.