Filter
Top Products
332
Programming Commands
TDF Trace Data Format
TDF
Trace Data Format
Syntax
The preset value for TDF is P.
Legacy Products
8560 series, 8566A/B, 8568A/B
Description
Formats trace information for return to the controller.
The different trace data formats are as follows:
• M selects the ASCII data format.
• P selects parameter data format. Numbers are in Hz, Volts, Watts, dBm, dBmV, DBuV, DBV.
• Specifying A returns data as an A-block data field. The MDS command determines whether data
comprises one or two 8-bit bytes. (See MDS (page 234))
• Specifying I returns data as an I-block data field. The MDS command determines whether data
comprises one or two 8-bit bytes. (See MDS (page 234))
• B selects binary data format. The MDS command determines whether data comprises one or two
8-bit bytes
TDF P
S
P
A
I
M
B
?
;
LF
CR
SP
,