Filter
Top Products
281
Programming Commands
OL Output Learn String
OL
Output Learn String
Syntax
Legacy Products
8566A/B, 8568A/B
Description
The OL command transmits information to the controller that describes the state of the analyzer when
the OL command is executed. This information is called the “learn string.” The learn string can be sent
from the controller memory back to the analyzer to restore the analyzer to its original state.
NOTE The OL command is not completely supported, due to differences between the
X-Series and 8566/8568. The following table outlines each byte of the array and
the bits supported within that byte.
Byte Support Information
1 Fixed decimal value 31
2 Fixed decimal value 118
3 to 9 Supported
10 Supported
11 Unsupported: Fixed decimal 0
12 to 17 Supported
18 Supported: Bits 6, 2, 1 and 0
Unsupported: Bits 7, 5, 4, and 3
OL
;
?
S
P
80 byte binary
string