Filter
Top Products
305
Programming Commands
RQS Request Service Conditions
RQS
Request Service Conditions
Syntax
Legacy Products
8560 series, 8566A/B, 8568A/B
Description
Sets a bit mask for service requests, each service request has a corresponding bit number and decimal
equivalent of that bit number as shown in the table below.Use the decimal equivalents to set the bit mask.
For example, to set a mask for bits 4 and 5, add the decimal equivalents (16 + 32 = 48), then send the
command RQS 48.
Table 4-26 Status Byte Definition
Bit# State Description
7
6 RQS Request Service
5 Error Present
4 Command Complete Any command completed.
3
2 End of Sweep Any sweep completed.
1 Message Display message appears.
0 Trigger Trigger activated.
RQS
;
numberS
P
?
LF
CR
SP
,