11 8
Programming Commands
BXC Exchange Trace B and Trace C
BXC
Exchange Trace B and Trace C
Syntax
Legacy Products
8566A/B, 8568A/B
Description
The BXC command exchanges Trace B data with Trace C data.
NOTE Trace C must not be an active trace. This means that the data in Trace C cannot be
updated as the analyzer sweeps. To ensure that the current settings of the analyzer
are reflected in the data exchanged between Trace B and Trace C, you must follow
the four step process below.
• Select single sweep mode (S2 or SNGLS command)
• Select the desired analyzer settings
• Take one complete sweep
• Exchange the data
NOTE The functions of the command BXC are identical to the KSi command (page 197)
and to the XCH TRB,TRC command (page 354).
BXC
;