Filter
Top Products
179
Programming Commands
KS, Mixer Level
KS,
Mixer Level
Syntax
Legacy Products
8566A/B, 8568A/B
Description
The KS, command specifies the maximum signal level that is applied to the input mixer for a signal that
is equal to or below the reference level.
The effective mixer level is equal to the reference level minus the input attenuator setting. When KS, is
activated, the effective mixer level can be set from -10 dBm to -70 dBm in 10 dB steps.
As the reference level is changed, the coupled input attenuator automatically changes to limit the
maximum signal at the mixer input to your specified setting for signals less than or equal to the reference
level.
NOTE If the external amplifier gain has been set, executing an IP command will not reset
this value. This is to protect the analyzer.
NOTE The functions of the KS, command are identical to the ML command (page 267).
KS, DM
S
P
MV
UV
?
;real
OA