Filter
Top Products
288
Programming Commands
PP Preselector Peak
PP
Preselector Peak
Syntax
Legacy Products
8560 series, 8566A/B
Description
The PP command optimizes preselector tracking to peak the amplitude of a signal at the active marker. If
a marker is not on the screen, PP places a marker at the highest signal level, and optimizes preselector
tracking at that frequency.
NOTE This command is only supported when the X-series analyzer’s maximum
frequency limit is greater than 3.6 GHz. If the command is issued on an analyzer
with a maximum frequency limit of 3.6 GHz or less the command is not
implemented and no error is generated.
PP
LF
CR
SP
,
;