07_ContHardwareErrors.fm Modified: 8/16/02
Template Version 1.0
252 GL-1020 Administrator’s Guide
Scan Kit Internal Error
(SK3)
Restart the controller. If the controller is not restored, recover
the HDD. Refer to the GL-1020 Operator’s Guide (Basic). If
the controller is still not restored, contact your TOSHIBA
authorized dealer for support.
Scan Kit Internal Error
(SK4)
If this message is displayed during Template selection, the
selected template may be disfunctional and the template
settings should be verified in TopAccess. Otherwise, restart
the controller. If the controller is not restored, recover the
HDD. Refer to the GL-1020 Operator’s Guide (Basic). If the
controller is still not restored, contact your TOSHIBA
authorized dealer for support.
Scan kit Internal Error
(SK5)
Restart both the controller and the copier. If the controller is
not restored after restarting, recover the HDD. Refer to the
GL-1020 Operator’s Guide (Basic). If the controller is still not
restored, contact your TOSHIBA authorized dealer for
support.
Scan Kit Internal Error
(SK6)
Scanning cannot start due to copier status. Correct copier
operation and try scanning again.
Scanner Memory full. Job is
cancelled.
Scanner memory is full and your request has not been
accepted. Use TopAccess to confirm the job is in process.
When all jobs have been completed, delete them from the
queue. If the error persists, restart the controller. If this does
not resolve the error, contact your TOSHIBA authorized
dealer for support.
Select either Public or
Private Scan. Private scan
may require a password.
Internal memory used is
NN%.
Verify that there are no active users. Execute [SCAN] –
[Administration] – [Delete Files] on TopAccess (administrator
mode) and delete the Data Processing Folder. Refer to the
TopAccess Online help or the TopAccess chapter of the
GL-1020 Administrator’s Guide. If the controller is not
restored, contact your TOSHIBA authorized dealer for
support.
Select either Public or
Private Scan. Private san
may require a password.
Shared memory used is
NN%.
Verify that there are no active users. Execute [SCAN] –
[Administration] – [Delete Files] on TopAccess (administrator
mode) and delete the Shared File Folder or TWAIN Data
Folder. Refer to the TopAccess Online help or the TopAccess
chapter of the GL-1020 Administrator’s Guide. If the
controller is not restored, contact your TOSHIBA authorized
dealer for support.
Scan-Related LCD Messages
MESSAGE CORRECTIVE ACTION
