Template 04_TAConfigureWirelessProperties.fm
102 GL-1020 Administrator’s Guide
Configuring IPX/SPX Settings
1 On the Administration tab, click the
Setup subtab.
2Click the
Wireless Network link.
The Wireless Network page opens.
3 In the IPX/SPX area, click the
Protocol drop-down list.
4 Select
Enable to enable IPX/SPX.
5Click the
Frame Type drop-down list.
6 Select the appropriate setting.
7Click
Save.
Configuring TCP/IP Settings
1 On the Administration tab, click the
Setup subtab.
2Click the
Wireless Network link.
The Wireless Network page opens.
3 In the TCP/IP area, click the
IP Address Resolution drop-down
list.
4 Select either
Static IP or DHCP.
Note: If DHCP is selected, the IP Address, Subnet Mask and
Gateway fields aren’t displayed.
5 Enter the IP address, subnet mask and gateway address if
appropriate.
6 Enter the address of the Primary DNS Server.
7 Enter the address of a Secondary DNS Server.
8 Continue with the instructions in Configuring SMB Settings
on page 102.
Configuring SMB Settings
1 On the Administration tab, click the
Setup subtab.
2Click the
Wireless Network link.
The Wireless Network page opens.
3 In the SMB area of the Wireless page, click the
Protocol drop-
down list.
4 Select
Enable to enable the SMB protocol.
