04_NetworkingNovell.fm Modified: 8/16/02
Template Version 1.0
134 GL-1020 Administrator’s Guide
8 From the NetWare Environment drop-down list, select the
applicable option:
w 4.x bindery emulation mode
w 4.x/5.x/6.x NDS Mode
w 4.x/5.x Mixed Mode.
9 In the Print Server Name field, enter the name of the Print
Server you created, for example,
GL_2_PS.
10 In the Printer Number field, enter the number assigned to the
printer you created.
For Bindery mode, the number is between 0 and 15; for NDS
mode, the number is between 0 and 254.
11 Scroll to the bottom of the page, then click
Save.
12 Proceed to Installing Client Software
on page 167.
PRINT SERVER MODE
Considerations and Limitations
n You must enable the IPX/SPX protocol before running the
GL-1020 controller in Print Server mode.
n You cannot attach any other printers to a GL-1020 running in
Print Server mode. This supersedes the 255 printer limit
imposed by NetWare.
Prerequisites
Use the NetWare management utility PCONSOLE (for NetWare
4.x bindery mode) or NWAdmin (NetWare 4.x, 5.x or 6.x NDS
mode) to perform the following steps before enabling Novell
print services through TopAccess.
Note: When using NetWare PCONSOLE version 4.x.x.,
toggle between NDS and Bindery modes using the F4 key.
For more information, refer to your Novell NetWare
documentation.
1 Create a new Print Server (PSERVER) on the Novell file
server.
2 Create a new print queue (e.g.,
GL_2_Q).
3 Create the printer (e.g.,
GL_2_PR) and select Other/Unknown
for the Printer Type.
