Filter
Top Products
4
GB
Location and
Function of
Parts
This chapter tells you about the
location and function of the various
buttons and controls on the front
panel and the supplied remote.
Further details are provided on the
pages indicated in the parentheses.
It also tells you about the information
that appears in the display window.
Front Panel Parts
Descriptions
1 ~/1 (power) switch (12, 21)
Press to turn on the deck. When you turn on the deck,
the STANDBY indicator turns off. When you press the
switch again, the deck turns off and the indicator
lights up.
2 Remote sensor
Point the remote towards this sensor (
) for remote
operations.
3 LP indicator (15)
Lights up when LP2 or LP4 mode is selected, or when
a track recorded in LP2 or LP4 mode is being played.
4 H.A.T.S. indicator
Lights up when the H.A.T.S. function is activated on
the receiver.
z
What is the H.A.T.S. function?
The H.A.T.S. (High-quality digital Audio Transmission
System) function on the receiver causes digital audio signals
output from an MD deck or the recording source (e.g., a CD
player) to be momentarily stored in a buffer in the receiver
prior to output. This reduces jitter that sometimes occurs
during digital audio transmission.
5 DISPLAY button (9, 13, 16, 20, 21)
• Press when the deck is stopped to display disc
information.
• Press during recording to display information on the
track being recorded or recordable time on the MD.
• Press during play to display information on the
current track.
• Press during Programme Play to display the number
of the track currently being played in the
programme.
• Press during recording or recording pause to adjust
the recording level.