Filter
Top Products
Other Functions
38
GB
Turning off the MD deck automatically
(Power Save function)
You can set so that the MD deck turns off when no
operation has been done for five minutes.
1 While the deck is stopped, press MENU/NO twice.
“Setup Menu” appears in the display.
2 Press ./> repeatedly until “Powersave On”
appears, then press YES.
3 Press ./> repeatedly to select the setting,
then press YES.
To Select
Turn on the Power Save function Powersave On
(factory setting)
Turn off the Power Save function Powersave Off
4 Press MENU/NO.
Other Settings Using the Setup Menu
About i.LINK
This section explains the general specifications and major
features of i.LINK. Read this section before doing any
i.LINK-related operation.
Note that i.LINK connections and operations may vary,
depending on the component. For details regarding the
connection of i.LINK components to this unit, see
“Hooking Up the i.LINK Components” on page 11.
i.LINK functions
i.LINK is a serial digital interface that supports the
bidirectional transmission of audio and video signals,
commands, and even component status information. All
that is needed to hook up i.LINK components are i.LINK
connecting cables. Audio and video components
connected within an i.LINK configuration can be used to
perform a wide range of operations and data exchanges
that is sure to expand as the number and variety of i.LINK
components grows.
Since i.LINK allows data to be transmitted from one
component to other components to which it is not directly
connected, there is no need to pay attention to connection
order. However, due to differences in characteristics or
specifications, operation of or data exchange with certain
i.LINK components may not be possible, even when they
are connected.
z
What is i.LINK?
i.LINK is a trademark proposed by Sony Corporation and
accepted by companies throughout the world as an easy-to-
remember name for the IEEE 1394 world standard of the Institute
of Electrical and Electronics Engineers.