Filter
Top Products
Playing MDs
23
GB
Playing Tracks Repeatedly
Z
You can play an entire MD repeatedly. This function can
be used with Shuffle Play to repeat all the tracks in
random order (page 24), or with Programme Play to
repeat all the tracks in the programme (page 24). You can
also repeat a specific track or portion within a track.
M
AyB
REPEAT
CLEAR
–
+
?/1
.>mM
NXxz
789
>10
10
/0
1
23
4
56
Note
If you turn off the deck or disconnect the mains lead, the deck
will store the last setting of the repeat play (“Repeat All” or
“Repeat 1”) and recall it the next time you turn on the deck.
However, settings of Repeat A-B Play are erased when you turn
off the deck or disconnect the mains lead.
Repeating all the tracks on the MD
(Repeat All Play)
Press REPEAT CLEAR repeatedly until “REP” lights up in
the display.
When you play an MD, the deck repeats the tracks as
follows:
When the play mode is The deck repeats
Normal play (page 21) All the tracks in sequence
Shuffle Play (page 24) All the tracks in random order
Programme Play (page 24) All the tracks in the programme in
sequence
To stop Repeat All Play
Press x.
To resume normal play
Press REPEAT CLEAR repeatedly until “REP” turns off.
Repeating the current track
(Repeat 1 Play)
While the track you want to repeat is being played,
press REPEAT CLEAR repeatedly until “REP 1” lights up
in the display.
Repeat 1 Play starts.
To stop Repeat 1 Play
Press x.
To resume normal play
Press REPEAT CLEAR repeatedly until “REP 1” turns off.
Repeating a specific portion within a
track (Repeat A-B Play)
You can specify one portion within a track to be played
repeatedly. Note that the portion that you specify must be
within the boundaries of a single track.
1 While the deck is playing, press AyB at the
starting point (point A) of the portion to be played
repeatedly.
“REP A-” lights up and “B” flashes in the display.
2 Continue playing the track or press M to locate
the ending point (point B), then press AyB.
“REP A-B” lights up and Repeat A-B Play starts.
To stop Repeat A-B Play and resume normal play
Press REPEAT CLEAR.
z
You can set a new starting point and ending point during
Repeat A-B Play
You can change the current ending point to a new starting point,
then specify a new ending point to repeat a portion right after the
current portion.
1 During Repeat A-B Play, press AyB.
The current ending point changes to the new starting point
(point A).
“REP A-” lights up and “B” flashes in the display.
2 Locate the new ending point (point B) and press AyB.
“REP A-B” lights up and the deck starts to repeat the newly
specified portion.