Filter
Top Products
Playing MDs
26
GB
Pausing after each track (Auto Pause)
You can set the MD deck so that it pauses after each track
to give you time to locate the next track to be recorded.
1 While the deck is stopped, press MENU/NO twice.
“Setup Menu” appears in the display.
2 Press ./> repeatedly until “Auto Off”
appears, then press YES.
3 Press ./> repeatedly to select the setting,
then press YES.
To Select
Turn on Auto Pause Auto Pause
Turn off Auto Pause Auto Off (factory setting)
4 Press MENU/NO.
To resume play after pausing
Press N.
Note
If you turn off the deck or disconnect the mains lead, the deck
will store the last setting (“Auto Pause” or “Auto Off”) and recall
it the next time you turn on the deck.
Tips for Recording From MDs to Tape