Filter
Top Products
36
GB
Other
Functions
This chapter explains other useful
functions that are available on the MD
deck.
Fade In and Fade Out Z
Fade-in Recording gradually increases the signal level at
the start of recording. Fade-out Recording gradually
decreases the signal level at the end of recording.
FADER
–
+
?/1
.>mM
NXxz
789
>10
10
/0
1
23
4
56
Fade-in Recording
During recording pause, press FADER.
b flashes in the display and the deck performs Fade-in
Recording for five seconds (factory setting) until the
counter reaches “0.0s.”
Fade-out Recording
During recording, press FADER.
B flashes in the display and the deck performs Fade-out
Recording for five seconds (factory setting) until the
counter reaches “0.0s, ” then pauses.
z
You can change the duration of Fade-in and Fade-out
Recording
1 While the deck is stopped, press MENU/NO twice.
“Setup Menu” appears in the display.
2 Press ./> repeatedly to select the setting, then press YES.
To change the duration of Select
Fade-in Recording F.in
Fade-out Recording F.out
3 Press ./> repeatedly to select the duration, then press
YES.
Both the Fade-in and Fade-out durations can be set in 0.1-
second steps.
To set the duration in 1-second steps, use m/M instead.
4 Press MENU/NO.