Filter
Top Products
19
GB
Recording on MDs
Synchro-recording With the
Audio Component of Your
Choice (Music Synchro-recording)
Z
The Music Synchro-recording allows you to automatically
synchronize recording kn the MD deck with the playing
of the selected programme source. The Track Marking
function, however, will differ according to the programme
source. For details, see “Marking Track Numbers While
Recording” on page 17.
–
+
?/1
.>mM
NXxz
789
>10
10
/0
1
23
4
56
M.SYNC
1 Do steps 1 to 6 of “Recording on an MD” on page
12.
2 Press M.SYNC.
The deck changes to recording pause.
3 Start playing the programme source.
Recording starts automatically.
To stop Music Synchro-recording
Press x.
Note
During Music Synchro-recording, Smart Space and Auto Cut will
operate regardless of their setting (“S.Space On” or “S.Space
Off”).
Synchro-recording With a
Sony CD Player (Normal/
High-Speed CD Synchro-recording)
Z
By connecting the MD deck to a Sony CD player, you can
copy the contents of CDs to MDs through simple
operations. You can select normal speed or high speed.
When you select high speed, the deck automatically
specifies 2× normal speed or 4× normal speed according
to the current recording mode (monaural, stereo, LP2
stereo, or LP4 stereo). If you use the remote during this
procedure, make sure the MD deck and the CD player are
as close to each other as possible since the remote operates
both the MD deck and the CD player.
?/1
x
A
. >
./>HX
z
YES
z
./>
MENU/NO
N
–
+
?/1
.>mM
Xxz
789
10
/0
1
23
456
N
>10
CD SYNCHRO
1 While the deck is stopped, press MENU/NO twice.
“Setup Menu” appears in the display.
2 Press ./> repeatedly until “Synchro High”
appears, then press YES.
3 Press ./> repeatedly to select the setting,
then press YES.
To record at Select
Normal speed Synchro Normal
High speed Synchro High*
(factory setting)
* When monaural or stereo recording mode is selected, CD
Synchro-recording is done in ×4 normal speed; when LP2 or LP4
is selected, recording is done in ×2 normal speed.
4 Press MENU/NO.
5 Turn on the receiver and the CD player, and select
CD on the receiver.
6 Do steps 3 to 6 of “Recording on an MD” on page
12.
7 Insert a CD into the CD player and select the
playback mode (normal play or Programme Play
only) on the CD player.