Filter
Top Products
27
GB
Editing Recorded MDs
Editing
Recorded MDs
This chapter explains how to edit the
tracks that have been recorded on an
MD.
Before You Start Editing
Brief descriptions of buttons used to edit
MDs
YES
m/M
./>
–
+
?/1
.>mM
N
MENU/NO
Xxz
789
>10
10
/0
1
23
4
56
The buttons described below are used to erase, divide,
move, or combine tracks on the MD.
Note
The operations of these buttons are different when naming a
track or MD. For details, see “Naming Tracks or MDs” on page
32.
No editing is possible when the Shuffle or Programme Play is
selected. Be sure to select normal play before editing the MD.
MENU/NO button: While the deck is stopped, playing,
or paused, press to edit tracks. While editing, press to
cancel editing.
Note
No editing is possible when the Shuffle or Programme Play is
selected. Be sure to select normal play before editing the MD.
./> buttons: Press to select an editing operation or
track number. You can also use the buttons to specify
points in a track for erasure or track division.
YES button: Press this button to enter a selection.
m/M buttons: Press to specify the unit (minute,
second, or frame) by which the MD is advanced when the
./> buttons are pressed. You can also use these
buttons to locate the end point of the portion to be erased.
For further details on the function of each button, see the
sections on editing operations.