Filter
Top Products
36
● If you wish to select a different program from the
same category, press the desired program. That pro-
gram will be highlighted. Press the scroll bar to see
other programs in the same category.
● If you wish to select a program from a different cate-
gory, press one of the tabs located at left and right to
select the desired category. The full name of the
selected category will appear in the upper right.
Let’s select the 03 Strings category. Press the 03
Strings tab, and then press the desired program to
select it. The program you pressed will be high-
lighted. Press the scroll bar to see other programs in
the same category.
For this example, select A003: Legato Strings. This
will produce a layered combination consisting of a
piano and rich strings.
6 If you are satisfied with the selected program,
press the OK button to close the popup menu.
If you press the Cancel button, your selection will
be discarded, and you will return to the program
that had been selected when the popup menu was
opened. For this example, press the OK button.
Adjusting the stereo position
7 Press the Mixer tab.
8 Press timbre 2 “Pan” (it will be highlighted).
Use the numeric keys [0]–[9], [ENTER] key,
[VALUE] slider, [VALUE] dial, or [ ][ ] keys to
modify the value.
With a setting of C064 the sound will be located in
the center. A setting of L000 places the sound at the
far left, and R127 at the far right. With a setting of
RND, the sound will move randomly between left
and right each time a note is played.
Adjusting the volume
9 Press timbre 2 “Volume” (it will be highlighted).
Use the numeric keys [0]–[9], [ENTER] key,
[VALUE] slider, [VALUE] dial, or [ ][ ] keys to
modify the value.
If you check “Hold Balance” and adjust the “Vol-
ume” value, the volume balance between the tim-
bres at the time that “Hold Balance” was checked
will be maintained while the volume of all timbres
is adjusted.