Korg Speaker System Speaker System User Manual


 
126
5 Set the “Foot Switch Polarity” to the polarity of the
foot switch you have connected.
If you have connected a Korg PS-1 pedal switch, set
this to (–) KORG Standard. If the polarity is not set
correctly, the pedal will not function appropriately.
If you want this setting to be preserved after the
power is turned off, save the setting (
p.39).
6 Either press the [PROG] key to enter Program P:
Play, or press the [COMBI] key to enter Combina-
tion P0: Play. When you press the foot switch, the
program/combination will change.
You can adjust the way in which changes in velocity or
after touch will affect the volume or tone. By changing
this, you can (for example) make the volume of the
notes more consistent even when they are played with
varying velocities (dynamics). Each curve has its own
character, so you can select the curve that is appropri-
ate for your own playing dynamics, playing style, and
the effect that you wish to obtain (
p.113, 114 in the
Parameter Guide).
1 Press the [GLOBAL] key to enter Global mode.
2 After pressing the [MENU] key, and press the P0:
Basic Setup.
3 Select the Basic tab.
4 To change the velocity curve, select “Velocity
Curve” and specify the desired curve.
To change the after touch curve, select “After
Touch Curve,” and specify the desired curve.
If you want this setting to be preserved after the
power is turned off, save the setting (
p.39).
* This setting will affect the operation of the entire
TRITON.
* Each program has parameters that allow you to
adjust the effect of velocity (playing dynamics), and
the change will depend on the settings of these
parameters. These parameters can be individually
set in detail in Program mode.
You can create your own original scales. You can create
sixteen different User Octave Scales in which the pitch
of each note in the octave is repeated for all octaves,
and one User All Note Scale in which the pitch of each
of the 128 notes can be specified independently.
If you want this setting to be preserved after the
power is turned off, save the setting (
p.39).
The user scales you create here can be used by specify-
ing the scale for a program, for each timbre of a combi-
nation, or for each track of a song (Sequencer/Song
Play). (
“Changing the scale”)
You can specify the scale for each program, for each
timbre in a combination, or for each track of a song
(Sequencer/Song Play mode).
These settings are made by “Type” in the following
pages, and by “Use Program’s Scale” for a combination
or song.
Here we will show how to make settings in Sequencer
mode.
1 Press the [SEQ] key to enter Sequencer mode.
2 After pressing the [MENU] key, and press the P2:
Trk Param.
3 Select the Other T01-08 tab or the Other T09-16 tab.
4 If you wish to use the scale that is specified for the
program used by a track, check the “Use Program’s
Scale” check box for that track.
Tracks that are not checked will use the scale speci-
fied by Scale “Type.”
5 Set “Type” to select the scale for the entire cur-
rently selected song.
If you want this setting to be preserved after the
power is turned off, save the setting (
p.38, p.39,
and the Parameter Guide p.48 and 102).
Adjusting the way in which
velocity or after touch will affect
the volume or tone
Creating original scales
Changing the scale
Program P1: Edit-Basic, Program Basic
Combination P2: Edit-Trk Param, Other
Song P2: Trk Param, Other T0108/T0916
Song Play mode P1: Track, Status/Scale T0108/T0916