Filter
Top Products
71
Using an External Device with 12V Trigger
Terminal
These outputs can be connected to the 12-volt trigger
inputs on other components. They output 12 volts (100
milliamperes max). The ZONE 2 TRIGGER OUT out-
puts 12 volts while the DTR-7.4 is in Zone 2 mode. The
A and B outputs can be assigned to input sources, in
which case, the assigned trigger output outputs 12 volts
while the input source is selected.
Connecting to an External Device
with 12V TRIGGER Terminal
Configuring the 12V Trigger Terminal
1
Press the Input button, and then roll the
scroll wheel to select the input source you
want to set.
2
Press the scroll wheel, and then press the
Setup button.
When the “Basic Menu” is displayed, select
“
→
Advanced Menu” using the and cursor
buttons and press the Enter button to display the
“Advanced Menu.”
3
Use the and cursor buttons to select
“2. Input Setup” and then press the Enter
button.
The “Input Setup” menu appears.
4
Use the and cursor buttons to select
“12V Trigger” and then press the Enter
button.
The “12V Trigger” menu appears.
12V TRIGGER
12V TRIGGER
12V TRIGGER
ZONE 2
A
B
12
V
TRIGGER OUT
DTR-7.4
The device located
in the Zone 2
Device A
Device B
5
Use the and cursor buttons to select
an item and then use the
and
cursor
buttons to set the desired setting.
This sub-menu allows you to make the required
settings to turn on the output from the 12V
TRIGGER terminal to control another compo-
nent or device with the DTR-7.4 for each input
source.
a. Trigger A
On:
Select to activate the device connected to
the 12V TRIGGER A terminal when the input
source is selected.
Off:
Select when no device is connected to the
12V TRIGGER A terminal or you do not want
the connected device to activate.
b. Trigger B
On:
Select to activate the device connected to
the 12V TRIGGER B terminal when the input
source is selected.
Off:
Select when no device is connected to the
12V TRIGGER B terminal or you do not want
the connected device to activate.
6
Press the Setup button to return to the
main menu.
2-7.12V Trigger Setup
a.Trigger A :On
b.Trigger B :Off
Quit:|SETUP|
Input:DVD
Making Full Use of Your DTR-7.4