Filter
Top Products
30
Selecting the Appropriate Setting for Your Connections
In this section, you will perform the initial settings for
the following scenarios.
• When the impedances for speakers connected to the
DTR-7.4 are between 4 and 6
Ω
(See page 18).
• When connecting speakers to the ZONE 2
SPEAKERS terminals (See page 66).
• When operating the remote controller using the IR IN
terminal (See page 69).
• When you want to fix the TV Format setting to PAL or
NTSC (Australian model only).
Note:
The settings within the Hardware Setup Menu will need
to be made before you use your DTR-7.4 for the first
time. Once you have selected one of the Hardware Setup
menu items, the setting will not be displayed again when
you enter the Basic Menu. To change the setting at a later
date, select the Advanced Menu to display the Hardware
Setup Menu.
If you want to perform these operations using the remote
controller, first press the scroll wheel.
Speaker Impedance Sub-menu
Use this sub-menu to set the impedance level of the
DTR-7.4 to match the specifications of the speakers you
are using.
a. Minimum
6 ohms (default):
Select when the impedances of all
speakers are between 6 and 16
Ω
.
4 ohms:
Select when the impedance of even one
speaker is between 4 and 6
Ω
.
Note:
Before you change this setting, be sure to first lower the
volume at the DTR-7.4 to the minimum level.
Hardware Setup
Master Volume
Tape
Tuner Phono Net AudioCD
Video 1
VCR 1
Video 3
Video 2
VCR 2
Video 4 Video 5
DVD
Z
one 2
()
GRN
Rec
()
RED
A
-
FO
RM Listening Mode Memory
Video 5 Input
StereoDirect
/
Pure Audio
DSP
Surround THX
Clear
Rec Out
Zone 2 Of
f
Setup
Tuning
Preset
Enter
Return
DimmerDisplay
S Video
Audio
Video L R
Memory FM Mode
DTR
-
7.4
Digital
--
/
---
@.
-
'
/ ABC DEF
PQRS TUV WXYZ
GHI JKL MNO
TV CH
TV VOL
+
10 0
123
456
789
+
-
+
-
Direct Tuning
Custom
Di l
Dimmer
T
V
Input
Sleep
Mti
T
V
On Standby
A
u
d
i
o
A
D
J
E
x
i
t
G
u
i
d
e
Clear
Input
T
o
p
M
e
n
u
M
e
n
u
S
e
t
u
p
R
e
t
u
r
n
Zone
2
InputMode
Macro
CH
VOL
Disc
Enter
Setup/Enter/Return/
Cursor
/ //
[ENTER]Quit:[SETUP]
Advanced Menu
0.Hardware Setup
1.Speaker Setup
2.Input Setup
3.Audio Adjust
4.Preference
5.Network Setup
→
Basic Menu
0.Hardware Setup
1.Speaker Impedance
2.Surr Back/Zone2
3.Remote Setup
4.TV Format
[ENTER]Quit:[SETUP]
1
Display the main menu.
Press the Setup button on the front panel, or press
the scroll wheel and then press the Setup button
on the remote controller to display the main menu
on the monitor and front display.
2
Use the and cursor buttons to select
“0. Hardware Setup” and then press the
Enter button.
The “Hardware Setup” menu appears.
3
Use the and cursor buttons to select
an item and then press the Enter button.
4
Use the and cursor buttons to select
an item and then use the and cursor
buttons to set the desired value.
5
Press the Setup button to exit the Setup
menu.
Press the Return button to return to the previous
menu.
0-1.Speaker Impedance
a.Minimum :6 ohms
Quit:[SETUP]