Filter
Top Products
13
Remote Controller—Continued
F Test Tone, CH SEL, Level– & Level+ buttons
[35]
These buttons are used to adjust the level of each
speaker individually. These functions can be set
only with the remote controller. The Level– and
Level+ buttons are also used to adjust the volume in
Zone 2.
G Audio SEL button [43]
This button is used to select the audio input signal
format: analog, digital, or multichannel.
H LIGHT button
This button is used to turn on or off the remote con-
troller’s illuminated buttons.
I Direct Tuning button [48]
This button is used with the number buttons to
select a radio station by entering its frequency. Press
this button first, and then use the number buttons to
enter the frequency.
J Display
The top line of this LCD display shows the name of
the currently selected input source. The bottom line
shows the currently selected remote controller
mode.
K Zone 2 button [68]
This button is used when you want to set the volume
and input source for Zone 2.
L Input button [40]
This button is used to select the input source. Press
this button first, and then roll the scroll wheel until
the name of the input source appears on the display.
M Sleep button [41]
This button is used to set the Sleep function. This
function can be set only with the remote controller.
N VOL button [40, 65]
This button is used to set the volume of the
DTR-7.4.
O Setup/Guide button [29]
This button is used to access the onscreen setup
menus (OSD) that appear on the TV.
P Muting button [40]
This button is used to mute the DTR-7.4. This func-
tion can be set only with the remote controller.
Q All CH ST button [47]
This button is used to select the All Ch Stereo listen-
ing mode.
R Stereo button [46]
This button is used to select the Stereo listening
mode.
S DSP/DSP buttons [47]
These buttons are used to select the DSP (digital
signal processor) listening modes.
T Re-EQ button [55]
This button is used to turn on and off the Re-EQ
function.
U L Night button [55]
This button is used to set the Late Night function.
Facilities and Connections