Agilent Technologies N9010A Stereo System User Manual


 
72 Chapter 1
Agilent EXA Signal Analyzer
Inputs/Outputs
Rear Panel
Description Specifications Supplemental Information
Headphone Jack
Connector 3.5 mm (1/8 inch) miniature
stereo audio jack
Output Power 90 mW per channel into 16 Ω (nominal)
Description Specifications Supplemental Information
10 MHz Out
Connector BNC female
Impedance 50 Ω (nominal)
Output Amplitude 0 dBm (nominal)
Output Configuration AC coupled, sinusoidal
Frequency 10 MHz ±
(10 MHz × frequency reference
accuracy)
Description Specifications Supplemental Information
Ext Ref In
Connector BNC female Note: Analyzer noise sidebands and spurious
response performance may be affected by the
quality of the external reference used. See
footnote “c” in the phase noise specifications
within the Dynamic Range section.
Impedance 50 Ω (nominal)
Input Amplitude Range
Sine Wave
Square Wave
5 to +10 dBm (nominal)
0.2 to 1.5 V peak-to-peak (nominal)
Input Frequency 10 MHz (nominal)
Lock range
±5 × 10
6
of selected external
reference input frequency