Filter
Top Products
Chapter 1 41
Agilent EXA Signal Analyzer
Amplitude Accuracy and Range
g. Slope error will nominally be well within the range of ±0.0009 × (P1 − P2). P1 and P2 are
defined in footnote f.
h. A small additional error is possible. In FFT sweeps, this error is possible for spans under 4.01
kHz. For non-FFT measurements, it is possible for RBWs of 3.9 kHz or less. The error is well
within the range of ±0.0021 × (P1 - P2) subject to a maximum of ±0.005 dB. (The maximum
dominates for all but very small differences.)P1 and P2 are defined in footnote f.
Description Specifications Supplemental Information
Available Detectors Normal, Peak, Sample,
Negative Peak, Average
Average detector works on RMS,
Voltage and Logarithmic scales