Filter
Top Products
194 Chapter 16
LTE Measurement Application
Measurements
Description Specifications Supplemental Information
Adjacent Channel Power Single Channel
Minimum power at RF
input
−50 dBm (nominal)
Accuracy
Channel Bandwidth
Radio Offset 5 MHz 10 MHz 20 MHz ACPR Range for Specification
MS Adjacent
a
±0.15 dB ±0.21 dB ±0.36 dB −33 to −27 dBc with opt ML
b
BTS Adjacent
c
±0.81 dB ±1.02 dB ±1.58 dB −48 to −42 dBc with opt ML
d
BTS Alternate
c
±0.27 dB ±0.46 dB ±0.87 dB −48 to −42 dBc with opt ML
e
Dynamic Range E-UTRA Test conditions
f
Offset
Channel
BW
Dynamic
Range
(nominal)
Optimum
Mixer Level
(nominal)
Adjacent 5 MHz −70.0 dB −16.5 dBm
Adjacent 10 MHz −
69.3 dB −16.5 dBm
Adjacent 20 MHz −
68.4 dB −16.3 dBm
Alternate 5 MHz −
75.8 dB −16.6 dBm
Alternate 10 MHz −
73.2 dB −16.4 dBm
Alternate 20 MHz −
70.3 dB −16.3 dBm
Dynamic Range UTRA Test conditions
g
Offset
Channel
BW
Dynamic
Range
(nominal)
Optimum
Mixer Level
(nominal)
2.5 MHz 5 MHz −70.5 dB −16.6 dBm
2.5 MHz 10 MHz −
70.5 dB −16.4 dBm
2.5 MHz 20 MHz −
71.4 dB −16.3 dBm
7.5 MHz 5 MHz −
76.5 dB −16.6 dBm
7.5 MHz 10 MHz −
76.5 dB −16.4 dBm
7.5 MHz 20 MHz −
75.7 dB −16.3 dBm
a. Measurement bandwidths for mobile stations are 4.5, 9.0 and 18.0 MHz for channel bandwidths of 5,
10 and 20 MHz respectively.
b. The optimum mixer levels (ML) are −19, −17 and −17 dBm for channel bandwidths of 5, 10 and
20 MHz respectively.
c. Measurement bandwidths for base transceiver stations are 4.515, 9.015 and 18.015 MHz for channel
bandwidths of 5, 10 and 20 MHz respectively.
d. The optimum mixer levels (ML) are −11, −8 and −6 dBm for channel bandwidths of 5, 10 and 20 MHz
respectively.
e. The optimum mixer level (ML) is −8 dBm.
f. E-TM1.1 and E-TM1.2 used for test. Noise Correction set to On.
g. E-TM1.1 and E-TM1.2 used for test. Noise Correction set to On.